Manual
Table Of Contents
- About This Manual
- CHAPTER 1: Overview
- CHAPTER 2: Legal issues & facts
- CHAPTER 3: Installation
- CHAPTER 4: Operation
- CHAPTER 5: Front Panel Control
- CHAPTER 6: Remote Operation
- Introduction
- Status - Overview
- Status - Sync
- Status - Network
- Status - Device
- Status - Input Streams
- Status - Output Streams
- Matrix
- Advanced - Overview
- Advanced - PTP Settings
- Advanced - PTP Unicast
- Advanced - PTP Profile Customized Settings
- Advanced - Current PTP Master
- Advanced - PTP Statistic
- Advanced - PTP Clock Setting
- Advanced - Network Advanced Settings
- Advanced - PTP Jitter
- Logging
- Statistic
- CHAPTER 7: Troubleshooting and Maintenance
- CHAPTER 8: Technical Data
- Index
- Glossary
- Appendix A - Stream State Messages
- Appendix B - Firmware Update
- Appendix C - AES3 Transparency
page 32 of 88 Montone.42 Manual - Version 2.0
CHAPTER 5: Front Panel Control
Parameters - RAVENNA Module
Path Parameter Explanation read
only
Information Device Name mDNS name (Bonjour, Zeroconf)
●
SW Version Software version
●
HW Version Hardware version
●
MAC Address Hardware identification of
network port 1
●
IP Address IP address of device at port 1
●
Subnet Mask Range of IP addresses within
network
●
DNS Server IP Address of Domain Name
Server
●
Configuration Connection Type* Static IP Address or DHCP/
Zeroconf (address is assigned by
server)
○
Dyn. Prot.* Setting of protocol for dynamic
connection
○
IP Address* IP address of device
○
Subnet Mask* Range of IP addresses within
network
○
DNS Server* IP Addresse of Domain Name
Server
○
HTTP Port* Port for remote control (default
80)
○
Default
Setting
No Resume - no changes.
○
Ye s Restore default settings of
device. All settings will be
overwritten!
○
Reboot No Resume - no changes.
○
Ye s Restart device. Audio will be
interrupted!
○
* requires reboot of the device to become valid.