Manual

page 25 of 88Montone.42 Manual - Version 2.0
CHAPTER 4: Operation
MADI Output
The signal format of the MADI output can be adjusted individually for each MADI
port. Two leds inform about channel mode and frame format.
The channel mode differs by transmission of either 56 audio channels (56 ch
mode) or 64 audio channels (64 ch mode).
The frame format ‘96k Frame’ is available for 2 FS transmission only. 1 FS and 4 FS
only use ‘48k Frame’. At 2 FS it can be either ‘48k Frame’ or ‘96k Frame’.
FORMAT
56ch
LED green - indicates the use 56 ch mode.
(OFF) = no MADI output uses 56 ch mode
(ON) = at least one MADI output uses
56ch mode
FORMAT
96k
LED yellow - indicates the use of 96k Frame.
(OFF) = no MADI output transmits a
96kFrame signal
(ON) = at least one MADI output transmits
a 96k Frame signal
Termination
The coaxial connection of the word clock and video input can be terminated with
75Ω to match the impedance according the wiring. It shall be activated if the
signal is not daisy chained to another device.
TERM.
75 Ω
LED yellow - indicates the activation state
of 75 Ω termination of the word clock input
and video input.
(OFF) = input not terminated
(ON) = input terminated with 75 Ω