Manual

page 20 of 88 Montone.42 Manual - Version 2.0
CHAPTER 4: Operation
Network
Two gigabit-ethernet ports are used for transmission of Audio-over-IP and clock
data and to control the device via a web browser interface. Firmware updates of
the RAVENNA module also use the network connection.
The networks ports are redundant. Both inputs are being processed while both
outputs carry the same stream data. If needed one port can be used for streaming
and one port for confi guration purposes.
NETWORK
Port 1
RJ 45 socket
Connect here for network transmission.
NETWORK
Port 2
RJ 45 socket
Connect here for network transmission.
NETWORK
LED left (Port 1 & 2)
LED orange - indicates the link state of the
network connection*.
(ON) = device link active
(OFF) = device link not active
NETWORK
LED right (Port 1 & 2)
LED green - indicates the activity state of
the network connection.
(ON) = data sent or received
(OFF) = no data transmission
* Some possible reasons that lead to an inactive link:
• device switched off
• connected device switched off
• cabling issue