Manual

page 6 of 40 MADI.MONI Manual - Version 1.1
CHAPTER 1: Overview
CHAPTER 1: Overview
Introduction
Welcome to MADI.MONI, DirectOut’s battery powered, mobile monitor and tester
for MADI signals. MADI.MONI provides a coaxial MADI I/O for standard BNC
cabling and a fl exible SFP I/O to meet various connection standards by using SFP
modules. Input signals are analysed (e.g. signal level, jitter, sample rate,...) and can
be monitored via a headphone output.
Feature Summary
MADI Ports 1 x SFP (empty cage without module)
1 x coaxial BNC connectors
MADI Formats 56/64 channel, 48k/96k Frame
Sample Rates 44.1, 48, 88.2, 96, 176.4, 192 kHz +/-12.5%
USB Port USB 2.0 (B) plug for charging and firmware updates.
Analysing Features Sample Rate, MADI Format, Signal Amplitude, Jitter
Display Segment display to indicate channel / volume / signal
level and 12 LEDs to confi rm the integrity of the
physical link, the format and settings of the MADI
transmission at a glance.
How it works
The signal of the selected input is analysed. Analysis results are displayed on
the device itself by individual LEDs for each parameter. Amplitude and Jitter are
monitored via simple ‘traffi c light’ LEDs.
The selected input can be monitored via headphones. Channel selection (mono or
stereo pairs) and volume level are adjusted via two push buttons.
The brightness of the display and the leds may be varied to match different lighting
conditions.