Manual

page 27 of 32MADI.BRIDGE Manual - Version 1.2
Appendix A - Remote Control MIDI Program Changes
Appendix A - Remote Control MIDI Program Changes
MIDI Program Changes consist of two bytes. The first byte normally defines the
command ‚Program Change‘ and the MIDI channel, the second one is a data value
byte.
The Program Change command in the MADI.BRIDGE is used as follows:
Code Function
0xC0 0x<vv> loads preset 0..9 (vv = 0..9).
0xC<n> 0x<vv> selects source vv (vv = 0..8) for output n (n = 1..8)