Manual

page 23 of 32MADI.BRIDGE Manual - Version 1.2
CHAPTER 4: Operation
Servicing / Remote Control
MIDI
The MIDI I/O is provided for remote control* of the device. Since the input
receives control data and the output sends status information of the device, both
connections are required for remote control.
MIDI
OUT / IN
2 x DIN 5-pin connector
OUT: MIDI output, connect for MIDI output
signal here.
IN: MIDI input, connect MIDI input
signal here.
* Remote access is available via MIDI using globcon control - see page 12.
USB
The USB port is used for fi rmware updates of the device.
USB USB 2.0 socket (Type B)
Connect here for fi rmware updates.