Manual

page 20 of 32 MADI.BRIDGE Manual - Version 1.2
CHAPTER 4: Operation
Preset Memory
Different signal routing scenarios can be stored into presets. Before recalling a
preset a 64 dot matrix shows a preview of the routing. This allows to navigate
through all presets without changing anything at this time.
PRESETS
Segment display (red) indicates the
input source for the MADI output.
Values: 1 to 9 = preset 1 to 9
0 = all outputs mute (read-only)
empty = display monitors the active
routing
The decimal point indicates that the preset
selection differs from the active signal routing.
SELECTION
Push buttons (up / down) to navigate
the preset memory.
up = increasing value
down = decreasing value
STORE
Push button to overwrite a preset.
Press and hold > 2 s to store the active signal
routing into the displayed preset.
The decimal point will disappear.
RECALL
Push button to recall a preset.
Press and hold > 2 s to overwrite the current
signal routing with the signal routing that is
previewed in the dot matrix.
NOTE
In the segment displays the decimal point adjacent to the number indicates, that
the displayed information differs from the current and active preset. So a RECALL
would change the signal routing at the outputs.