Manual

page 15 of 32MADI.BRIDGE Manual - Version 1.2
CHAPTER 3: Installation
5. Optional: Connect a USB cable to the USB port for fi rmware updates. This
requires the USB Serial driver (Windows) being installed fi rst.
The driver and the installation instructions are available at
www.directout.eu.
6. Optional: Connect MIDI cables to the DIN connectors for remote control.
NOTE
Remote control is available via globcon - see page 12..
7. Using the power cord provided connect the PSUs to a matching power
supply:
The left socket is switched by the power supply switch. The right socket will
power up the device immediately when connected to the mains.
WARNING!
This device must be connected to the mains using the three-cord power leads
supplied with the system. Only supply the voltages and signals indicated (84 V –
264V).