Manual

page 56 of 80 MA2CHBOX.XL Manual - Version 1.3
CHAPTER 5: MA2CHBOX Remote
Serial Embedder Routing
Baud Rate Pulldown menu to select
the transfer rate of the serial
communication.
Values: 115200 / 38400 / 19200
baud
Remote In Pulldown menu to select signal
port for incoming control data.
Values: USB / SC / BNC / SFP
SC UART
Out
Pulldown menu to select signal
source of outgoing control data at
the SC output.
Values: SC / BNC / SFP / USB /
Remote In / off
In case of a communication loss via MADI link you
may reset the serial embedder matrix to regain ac-
cess via the local USB port - see page 51.