Manual

page 39 of 80MA2CHBOX.XL Manual - Version 1.3
CHAPTER 4: Operation
*** Monitoring of either a stereo pair or a single
mono channel.
Stereo => odd channels to left and even channels to
right.
Mono => left and right are identical.
This setting affects the indication of channels too
(see <Numbers> + Decimal points).
Using AES as input source (<AA>) will override the
setting and force to stereo temporarily.
**** After a short period of time without using the
encoder knob the idle mode is activated.
The display then indicates the input level for the left
and right channel individually. The three horizontal
bars of the segment display mark the values
-30dBFS, -18 dBFS and -6 dBFS.
The decimal point indicates a signal different from
digital zero.