Manual

page 38 of 80 MA2CHBOX.XL Manual - Version 1.3
CHAPTER 4: Operation
Display Meaning
System Settings
F <x> Selected input scaling factor.*
Values: 1 = 1 FS / 2 = 2 FS / 4 = 4 FS
S <x> Sync Source**
Values: o = SC input / b = BNC input / c =
SFP input / A = AES input
C <x> Monitor mode is indicated.***
Values: 1 = mono / 2 = stereo
d <x> Level metering (display) during idle
mode.****
Values: 0 = off / 1 = on
* A 96k Frame signal at the input that is defined
as clock source will override the setting and force
the scaling factor to 2 FS temporarily. The set value
is restored once a 48k Frame signal is detected.
Override is indicated by blinking display of 1 FS or
4FS.
** If only one input is locked the setting is ignored
and this input is used as clock source.