Manual

page 33 of 80MA2CHBOX.XL Manual - Version 1.3
CHAPTER 4: Operation
Number
&
Decimal
Point(s)
The selected channel (pair) is
indicated.
In stereo mode odd numbers are
indicated only; e.g. <05.> is selected
= monitoring of MADI channels 05 (left)
and 06 (right)
In mono mode all channels are indicated.
Blinking of left decimal point indicates:
Mute active.
Blinking numbers indicate:
channel not available
(at scaling factor 2 FS or 4 FS or in 56ch
mode)
Number
The adjusted volume level is
indicated.
The signal can be varied within a range
of -96dBFS to 0 dBFS in steps of 1 dB.
An additional boost up to 9 dB can be
applied.
Blinking numbers indicate: Mute active.