Manual

page 32 of 80 MA2CHBOX.XL Manual - Version 1.3
CHAPTER 4: Operation
Display / Menu
The 7 segment display indicates the selected channel
pair, adjusted volume, level, menu settings.
The display is used in two modes:
• idle mode - volume (or channel) selection or
level metering
• menu mode - menu settings
After a short period of time without using the
encoder knob the idle mode becomes active;
i.e. the menu is left automatically and the display
switches back to
level metering or vol (or channel) selection.
NOTE
Firmware 1.3 (Q4/2014) introduces a default setting
for either channel or volume selection in idle mode -
see „Idle Mode“ on page 34.