Manual

page 29 of 80MA2CHBOX.XL Manual - Version 1.3
CHAPTER 4: Operation
Power 1 Switch
Enable / disable power supply.
Volume* 1 Encoder
Press and turn for all operations
(channel selection, volume, menu
settings).
Press short to toggle between
volume and channel selection
(Vol/Ch) or to navigate through the
menu.
Press for more than 2 seconds
to toggle between Vol/Ch and the
menu.
Press twice (“double click”) to
mute / unmute the output. Turning
the encoder knob at volume
selection will also unmute the
output
* Mute is available for the outputs Headphones, Line
Out and AES. It is applied only to outputs that are
set to ‘Encoder’ (‘E’) in the menu - see section ‘Level
Settings’ on page 40.