Manual

page 24 of 80 MA2CHBOX.XL Manual - Version 1.3
Chapter 3: Installation
The line output is not servo balanced. Do not
connect the negative lead to ground. This may cause
damage at the output stage. Observe the technical
specifi cations listed in this document.
WARNING
6. Optional: Connect an USB cable to the USB
port for remote control or fi rmware updates.
This requires the USB Serial driver (Windows)
being installed fi rst. The driver and the
installation instructions are available at
www.directout.eu.
7. Using the power cord provided connect the
PSU to a matching power supply:
WARNING
This device must be connected to the mains using
the three-cord power leads supplied with the system.
Only supply the voltages and signals indicated
(84V – 264V).