Manual
Table Of Contents
- About This Manual
- Chapter 1: Overview
- CHAPTER 2: Legal issues & facts
- Chapter 3: Installation
- CHAPTER 4: Operation
- CHAPTER 5: Remote Control
- Introduction
- Browser Control
- Status - Overview
- Status - Sync
- Status - Network
- Status - Device
- Status - Input Streams
- Status - Output Streams
- Matrix
- Advanced - Overview
- Advanced - PTP Settings
- Advanced - PTP Unicast
- Advanced - PTP Profile Customized Settings
- Advanced - Current PTP Master
- Advanced - PTP Statistic
- Advanced - PTP Clock Setting
- Advanced - Network Advanced Settings
- Advanced - PTP Jitter
- NMOS - Overview
- NMOS - NIC1 & NIC2
- NMOS - Additional Settings
- Logging
- Statistic
- Switch
- CHAPTER 6: Troubleshooting and Maintenance
- CHAPTER 7: Technical Data
- Appendix A - Wiring Sketches
- Appendix B - Working with BLDS™
- Appendix C - Working with ch 57 mode
- Appendix D - Firmware Update
- Index
page 88 of 93 EXBOX.RAV Manual - Version 1.1
Appendix D - Firmware Update
Appendix D - Firmware Update
The device is updated via network.
The firmware update will update EXBOX.RAV and the AoIP module.
Visit www.directout.eu and navigate to the EXBOX.RAV product page.
Download:
• EXBOX.RAV Firmware
Open the control page of the module and navigate to the tab STATUS and click
SETTINGS in the top right corner (p 40).
Click ‘Update’ and browse to the update file after unzipping first.
Example: exbox_rav_fw_163_hw_0_17_sw_0_34.update
Folllow the instructions displayed.
WARNING!
It is strongly recommended to backup the device configuration (Save Preset)
before running any update.