Manual
Table Of Contents
- About This Manual
- Chapter 1: Overview
- CHAPTER 2: Legal issues & facts
- Chapter 3: Installation
- CHAPTER 4: Operation
- CHAPTER 5: Remote Control
- Introduction
- Browser Control
- Status - Overview
- Status - Sync
- Status - Network
- Status - Device
- Status - Input Streams
- Status - Output Streams
- Matrix
- Advanced - Overview
- Advanced - PTP Settings
- Advanced - PTP Unicast
- Advanced - PTP Profile Customized Settings
- Advanced - Current PTP Master
- Advanced - PTP Statistic
- Advanced - PTP Clock Setting
- Advanced - Network Advanced Settings
- Advanced - PTP Jitter
- NMOS - Overview
- NMOS - NIC1 & NIC2
- NMOS - Additional Settings
- Logging
- Statistic
- Switch
- CHAPTER 6: Troubleshooting and Maintenance
- CHAPTER 7: Technical Data
- Appendix A - Wiring Sketches
- Appendix B - Working with BLDS™
- Appendix C - Working with ch 57 mode
- Appendix D - Firmware Update
- Index
page 85 of 93EXBOX.RAV Manual - Version 1.1
Appendix B - Working with BLDS™
Appendix B - Working with BLDS™
Introduction
The Buffer Loop Detection System™ is used to detect silence or a corrupted input
signal - e.g. caused by an application hang of the playout system (repeating buffers)
or stuttered playback due to system overload.
A BLDS™ generator creates a .wav file containing a low levelled signal which is
inserted into the MADI stream.The artificial design of the BLDS™ signal enables
reliable and inaudible switch-over within one sample.
BLDS™ Generator
The application is available for Windows® and OS X®.
1. Download the application at www.directout.eu
2. Unpack the zip archive and open the
‘BLDS_Generator.exe’ (Windows®) or ‘BLDS Generator.app’ (OS X®).
3. Define sample rate and duration using the drop down menus.