Manual

page 64 of 93 EXBOX.RAV Manual - Version 1.1
CHAPTER 5: Remote Control
Mode auto = PTP-clock master / slave configuration is
auto negotiated between devices in the
network. Module’s master / slave state
may change automatically.
slave only = PTP-clock slave configuration is
preferred. Module clocks to another
device in the network
preferred master = PTP-clock master configuration is
preferred. Module acts as network
grandmaster. Priority values are adjusted
automatically to ensure Grandmaster
status. *
master only = PTP-clock master is forced. **
Profile Selects predefined PTP profile (default E2E, default P2P,
media E2E, media P2P) or activates customized PTP profile.
* If more than one device announces as PTP-clock master the network
Grandmaster is determined following the Best Master Clock Algorithm
(BMCA).
** ‘Master only’ configures the device to act as Unicast Grandmaster. This setting
is available only with PTP Mode set to ‘unicast’
NOTE
PTP profile ‚customized‘ allows for individual adjustment of the PTP parameters. If
profile is set to ‚media‘ or ‚default‘ the PTP parameters cannot be altered and are
displayed only. Factory default setting is PTP Media Profile E2E.