Manual

page 58 of 93 EXBOX.RAV Manual - Version 1.1
CHAPTER 5: Remote Control
Output Stream Settings
Up to 32 output streams can be sent to the network. Each stream is organized
in a session (SDP = Session Description Protocol) that describes the stream
parameters (audio channels, audio format, etc.).
Each stream may be labelled with an individual stream name (ASCII) which is
useful for enhanced comfort at organizing the setup.
The stream settings allow to adjust the processing of the sent audio data (blocks
per frame, format, signal routing, ...). The sending of stream data starts once the
stream has been enabled.
Once the stream is active, the SDP data is displayed and may be copied from the
window or downloaded via http://<exbox-rav>/sdp.html?ID=<stream no.>.