Manual

page 46 of 93 EXBOX.RAV Manual - Version 1.1
CHAPTER 5: Remote Control
Status - Input Streams
The module can subscribe up to 32 streams. The overview displays the basic
information of each stream. The input stream name can be set manually (discovery
protocol: manually, see p 54) overriding the SDP’s stream name information.
A backup stream can be defined as source after an adjustable timeout. A central
active / inactive switch allows to toggle the stream state of all input streams at
once.
01 to 32 State of incoming streams
(OFF) = stream not activated
(ON) = stream activated, receiving data
(ON) = stream activated, receiving data via
one port only (input redundancy)
(blinking) = stream activated, not receiving data
(unicast, connection not established)
01 to 32
Name
Name of stream gathered from SDP or set manually
in the stream settings dialog.
01 to 32
xx ch
Number of audio channels transported by the stream