Manual
Table Of Contents
- About This Manual
- Chapter 1: Overview
- CHAPTER 2: Legal issues & facts
- Chapter 3: Installation
- CHAPTER 4: Operation
- CHAPTER 5: Remote Control
- Introduction
- Browser Control
- Status - Overview
- Status - Sync
- Status - Network
- Status - Device
- Status - Input Streams
- Status - Output Streams
- Matrix
- Advanced - Overview
- Advanced - PTP Settings
- Advanced - PTP Unicast
- Advanced - PTP Profile Customized Settings
- Advanced - Current PTP Master
- Advanced - PTP Statistic
- Advanced - PTP Clock Setting
- Advanced - Network Advanced Settings
- Advanced - PTP Jitter
- NMOS - Overview
- NMOS - NIC1 & NIC2
- NMOS - Additional Settings
- Logging
- Statistic
- Switch
- CHAPTER 6: Troubleshooting and Maintenance
- CHAPTER 7: Technical Data
- Appendix A - Wiring Sketches
- Appendix B - Working with BLDS™
- Appendix C - Working with ch 57 mode
- Appendix D - Firmware Update
- Index
page 40 of 93 EXBOX.RAV Manual - Version 1.1
CHAPTER 5: Remote Control
Settings
Information about the the device's firmware and the module's software/hardware
version and the serial number.
AoIP Module SW* Module´s software version. It is updated together
with hardware version.
AoIP Module HW* Module´s bitstream version. It is updated together
with software version.
Firmware Update Opens a dialog for selection of the update file - see
"Appendix D - Firmware Update" on page 88.
Hardware Reboot Restart of the AoIP module. Confirmation required.
Audio transmission will be interrupted.
EXBOX.RAV Firmware* Device firmware version
EXBOX.RAV Serial* Device serial number
Language Menu language (english, german).
Manufacturer Settings
Reset
Restore device settings to factory defaults.
Confirmation required.
* This information is required when contacting DirectOut Support.