Manual

page 37 of 93EXBOX.RAV Manual - Version 1.1
CHAPTER 5: Remote Control
Status - Network
Name Module’s name in the network. Used e.g. for mDNS
service. The name needs to be unique throughout the
network.
NIC 1 / NIC 2 Monitoring state of network interface controller (NIC)
(OFF) = not connected
(ON) = connected with the network
MAC address Hardware identification of NIC.
IP address IP address of device
Sync port Selected port for PTP sync
GMID Grand Master ID (PTP)
Hyperlinks
Name / IP address (p 38)
Mouse over:
LED NIC 1 - indicating link state and connection speed
LED NIC 2 - indicating link state and connection speed
NOTE
If NIC 1 and NIC 2 are connected to the same switch, they must be configured to
different subnets - see "Network Settings" on page 38.