Manual

page 36 of 93 EXBOX.RAV Manual - Version 1.1
CHAPTER 5: Remote Control
Clocking to word clock
• MADI BNC input expects a word clock signal (AES11)
• BNC input in the routing matrix can still be patched as source, but will not
transmit audio.
• EARS™ mode 'NET > BNC' will not work as expected, as the BNC input is
not available as backup source.
PTP Settings
PTP Input Port selection for PTP clock input. ‘NIC 1 & 2’ means
input redundancy.
IP Mode PTP via multicast, unicast or in hybrid mode. *
Mode PTP-clock master / slave configuration is auto
negotiated between devices in the network.
Selection: Auto, Slave only, Preferred master,
Master only *
Profile PTP profile selection (default E2E, default P2P,
media E2E, media P2P, customized)
Customized profile Edit opens the tab ‘ADVANCED’ to adjust the custom
profile.
* See „Advanced - PTP Clock Setting“ on page 69 for more details.