Manual

page 34 of 93 EXBOX.RAV Manual - Version 1.1
CHAPTER 5: Remote Control
Status - Sync
The LEDs inform about the lock / sync state of each MADI port and the PTP clock.
On the MADI input channel mode 56 / 57 and 64 channels are detected
automatically.
For the MADI output both frame format and channel mode can be set individually.
Click on SFP or BNC or SC to open the settings.
Frame Format Frame format for MADI output signal (48k / 96k Frame)*
Channel Mode Channel mode for MADI output signal
(56 ch / 57 ch / 64 ch)**
* 96k Frame format is applied at 2 FS operation only.
** See See „Appendix C - Working with ch 57 mode“ on page 87.
SYNC
PTP
SFP
BNC
SC
LED - indicates selected clock source and the
lock / sync state of MADI input, PTP-clock or the
internal clock generator.
(OFF) = no signal lock
(100 % green) = signal lock, in sync,
selected clock source
(blinking red) = signal lock, not in sync with
selected clock source
(blinking green) = input selected as clock source and
no signal lock.