Manual

page 27 of 93EXBOX.RAV Manual - Version 1.1
CHAPTER 4: Operation
Clocking to word clock
The BNC MADI input also accepts a word clock signal according to AES11. The
operating mode of the BNC input is selected in the Remote control
- see p 36.
CLOCK SOURCE
/ SYNC
BNC
LED - indicates selected clock source and the lock
/ sync state of MADI BNC / WCK input.
(OFF) = no signal lock
(50 % green) = signal lock, in sync
(100 % green) = signal lock (MADI),
in sync, selected clock source
(100 % purple) = signal lock (WCK),
in sync, selected clock source
(blinking red) = signal lock, not in sync with selected
clock source
(blinking green) = input selected as clock source (MADI)
and no signal lock.
(blinking purple) = input selected as clock source (WCK)
and no signal lock.
Independent from the operating mode of the MADI BNC input the MADI BNC
output does output a MADI signal.
TIP
With the FastSRC™ activated you may clock the device to word clock and connect
seamlessly to the RAVENNA network.
SFP
WCK
SC
RAVENNA
SFP
BNC
SC
RAVENNA
Routing
EXBOX.RAV
Routing
Audio Network
FSRC
WCK