Manual

page 24 of 93 EXBOX.RAV Manual - Version 1.1
CHAPTER 4: Operation
Input / Output - Network
Four network ports are available for transmission of audio signals and remote
control. Two independent network interface controllers (NICs) can connect with
each of the four network ports of the built-in switch.
More details about the switch configuration - see page 77.
01 (PoE) RJ45 socket (1 Gbit/s)
Network interface - connect here for network transmission.
This port accepts a PoE source for power supply - see page
22.
02 RJ45 socket (1 Gbit/s)
Network interface - connect here for network transmission.
03 RJ45 socket (1 Gbit/s)
Network interface - connect here for network transmission.
04 RJ45 socket (1 Gbit/s)
Network interface - connect here for network transmission.
LED left
(Port 1 to 4)
LED orange - indicates the link state of the
network connection*.
(ON) = device link active
(OFF) = device link not active
LED right
(Port 1 to 4)
LED green - indicates the activity state of the
network connection.
(ON) = data sent or received
(OFF) = no data transmission
* Some possible reasons that lead to an inactive link:
• device switched off
• connected device switched off
• cabling issue