Manual
Table Of Contents
- About This Manual
- Chapter 1: Overview
- CHAPTER 2: Legal issues & facts
- Chapter 3: Installation
- CHAPTER 4: Operation
- CHAPTER 5: Remote Control
- Introduction
- Browser Control
- Status - Overview
- Status - Sync
- Status - Network
- Status - Device
- Status - Input Streams
- Status - Output Streams
- Matrix
- Advanced - Overview
- Advanced - PTP Settings
- Advanced - PTP Unicast
- Advanced - PTP Profile Customized Settings
- Advanced - Current PTP Master
- Advanced - PTP Statistic
- Advanced - PTP Clock Setting
- Advanced - Network Advanced Settings
- Advanced - PTP Jitter
- NMOS - Overview
- NMOS - NIC1 & NIC2
- NMOS - Additional Settings
- Logging
- Statistic
- Switch
- CHAPTER 6: Troubleshooting and Maintenance
- CHAPTER 7: Technical Data
- Appendix A - Wiring Sketches
- Appendix B - Working with BLDS™
- Appendix C - Working with ch 57 mode
- Appendix D - Firmware Update
- Index
page 23 of 93EXBOX.RAV Manual - Version 1.1
CHAPTER 4: Operation
Input / Output - MADI
Three different MADI ports enable flexible connectivity in various scenarios. Due
to the device's routing capabilities format conversion between different MADI
formats is possible.
MADI BNC OUT BNC socket
MADI output - connect here for MADI output signal.
MADI BNC IN BNC socket*
MADI or WCK input - connect MADI or word clock input
signal here.
MADI SC OUT SC socket
MADI output - connect here for MADI output signal.
MADI SC IN SC socket
MADI input - connect MADI input signal here.
MADI SFP I/O SFP socket
Insert SFP module here and connect MADI input/output.
* The BNC input may be operated as word clock input (AES11) - see p 27.