Manual
Table Of Contents
- About This Manual
- Chapter 1: Overview
- CHAPTER 2: Legal issues & facts
- Chapter 3: Installation
- CHAPTER 4: Operation
- CHAPTER 5: Remote Control
- Introduction
- Browser Control
- Status - Overview
- Status - Sync
- Status - Network
- Status - Device
- Status - Input Streams
- Status - Output Streams
- Matrix
- Advanced - Overview
- Advanced - PTP Settings
- Advanced - PTP Unicast
- Advanced - PTP Profile Customized Settings
- Advanced - Current PTP Master
- Advanced - PTP Statistic
- Advanced - PTP Clock Setting
- Advanced - Network Advanced Settings
- Advanced - PTP Jitter
- NMOS - Overview
- NMOS - NIC1 & NIC2
- NMOS - Additional Settings
- Logging
- Statistic
- Switch
- CHAPTER 6: Troubleshooting and Maintenance
- CHAPTER 7: Technical Data
- Appendix A - Wiring Sketches
- Appendix B - Working with BLDS™
- Appendix C - Working with ch 57 mode
- Appendix D - Firmware Update
- Index
page 22 of 93 EXBOX.RAV Manual - Version 1.1
CHAPTER 4: Operation
Never connect a PoE link to a network interface that is not marked explictly for PoE
operation. The voltage supplied there may damage the interface.
Global Control
PSU 1 Hirose socket
Connect the power supply here (9 - 24 V DC).
PSU 2 Hirose socket
Connect the power supply here (9 - 24 V DC).
01 (PoE) RJ45 socket
Connect PoE link here. PoE Class 0 / 0.4 - 13 W
NOTE
The device does not provide a power switch. Connecting a working power supply
to the device will power up the device immediately.
WARNING!
POWER
PSU 1
PSU 2
PoE
LED green - indicates state of power supply
(OFF) = power supply not working
(ON) = power supply working