Manual
Table Of Contents
- About This Manual
- Chapter 1: Overview
- CHAPTER 2: Legal issues & facts
- Chapter 3: Installation
- CHAPTER 4: Operation
- CHAPTER 5: Remote Control
- Introduction
- Browser Control
- Status - Overview
- Status - Sync
- Status - Network
- Status - Device
- Status - Input Streams
- Status - Output Streams
- Matrix
- Advanced - Overview
- Advanced - PTP Settings
- Advanced - PTP Unicast
- Advanced - PTP Profile Customized Settings
- Advanced - Current PTP Master
- Advanced - PTP Statistic
- Advanced - PTP Clock Setting
- Advanced - Network Advanced Settings
- Advanced - PTP Jitter
- NMOS - Overview
- NMOS - NIC1 & NIC2
- NMOS - Additional Settings
- Logging
- Statistic
- Switch
- CHAPTER 6: Troubleshooting and Maintenance
- CHAPTER 7: Technical Data
- Appendix A - Wiring Sketches
- Appendix B - Working with BLDS™
- Appendix C - Working with ch 57 mode
- Appendix D - Firmware Update
- Index
page 20 of 93 EXBOX.RAV Manual - Version 1.1
Chapter 3: Installation
Keep any packaging in order to protect the device should it need to be dispatched
for service.
Never connect a PoE link to a network interface that is not marked explictly for PoE
operation. The voltage supplied there may damage the interface.
Power over Ethernet
The device can also be operated via a power over ethernet connection.
Connect the port labelled '01 (PoE)' to an appropriate PoE switch (PoE Class 0 /
0.4 - 13 W, IEEE 802.3af).
WARNING!
TIP