Manual

page 67 of 94EXBOX.MD Manual - Version 1.7
CHAPTER 5: Remote Control
STATUS - DEVICE
Information about the current PSU state, the device's
firmware and software version and the serial number.
This information is required when contacting
DirectOut Support.
PSU State
Three LEDs inform about the current state of each
PSU individually.
PSU 1,
PSU 2,
PoE
LED indicates state of power supply
(PSU).
(OFF) = psu not active
(100 % green) = psu active
(blinking yellow) = psu active, after failure
(blinking red) = psu not active, after
being active before
To reset the display of the PSU state click on one of
the LEDs.