Manual

page 63 of 94EXBOX.MD Manual - Version 1.7
CHAPTER 5: Remote Control
EARS™ - Routing
With EARS™ activated the routing matrix is ignored.
MAIN source is always the Dante input.
Mode 1:
No redundancy switching, signal routing follows
routing matrix.
Modes 2-4 - 'Dante > MADI':
All 64 channels of the Dante input are routed onto all
outputs (1:1). If the trigger signal of the Dante input
fails, the Backup MADI port is taken according to the
mode (either SFP, BNC or SC) and also routed onto all
outputs.
Mode 5 - 'Dante > Dante':
Dante input channels 1 - 32 are used as MAIN source
and channels 33 - 64 are used as BACKUP source.
Depending on the trigger state MAIN or BACKUP are
routed onto all outputs.
If the trigger signal fails on channel 32, the Backup
signal (= Dante channels 33 - 64) is taken and routed
onto all outputs.