Manual

page 61 of 94EXBOX.MD Manual - Version 1.7
CHAPTER 5: Remote Control
Mode Pull-down menu to adjust the EARS™
mode
Values:
1 = off
2 = Dante > SFP
3 = Dante > BNC
4 = Dante > SC
5 = Dante > Dante
Main LED indicates state of trigger signal
in audio channel 64 (modes 2 - 4) or
channel 32 (mode 5)
(OFF) = no trigger expected
(100 % green) = BLDS™ signal present
(100 % yellow) = Pilot tone present
(blinking red) = no trigger signal
Backup LED indicates state of trigger signal
in audio channel 64 (modes 2 - 5).
(OFF) = no trigger expected
(100 % green) = BLDS™ signal present
(100 % yellow) = Pilot tone present
(blinking red) = no trigger signal
Trigger
state
LED indicates source of switched
output
(OFF) = standard routing active
(100 % green) = both or no trigger
signals detected,
MAIN input active
(100 % yellow) = Backup trigger active,
BACKUP input active