Manual

page 59 of 94EXBOX.MD Manual - Version 1.7
CHAPTER 5: Remote Control
DO.Net
on Port
Pull-down menu to select the MADI
port for remote control.
Values:
Off = no control data de-/embedded
SFP = control data at SFP port
BNC = control data at BNC port
SC = control data at SC port
NOTE
Large Network Environments
For proper transport of the control data via network
check to enable UDP Multicast Routing in the entire
network for 224.7.7.7 Ports 7777 to 8555.
IGMP v3 is used.
If you experience trouble connecting the device with
the remote, you may start with a point-to-point setup
first.