Manual

page 58 of 94 EXBOX.MD Manual - Version 1.7
CHAPTER 5: Remote Control
STATUS - SETTINGS - DO.NET
To enable remote control via network a so-called
DO.Net daemon is used to transmit the control data
between the ethernet connection of the EXBOX.MD
and one selected MADI port.
DO.Net can be used to remote control any ANDIAMO
converter via network using the MADI link between
EXBOX.MD and the ANDIAMO.
NOTE
The MADI link must be bidirectional and no 3rd party
devices shall be used in the signal chain.
Clocking to word clock will interrupt the transmission
of the control data when the MADI BNC port is
selected for DO.Net.
Network Link
with control data
MADI Link
control data embedded
EXBOX.MD
DO.Net daemon
ANDIAMO