Manual

page 56 of 94 EXBOX.MD Manual - Version 1.7
CHAPTER 5: Remote Control
Current
Master
Displays current clock master and measured
sample frequency.
Clock
master
Pull-down menu - selection of clock
source
Values:
PTP = PTP clock (Master or Slave)
SFP = MADI SFP input
BNC = MADI BNC input
SC = MADI SC input
INT 44.1 = internal clock generator 44.1 kHz
INT 48 = internal clock generator 48 kHz
WCK* = Word Clock @ MADI BNC input
Scaling
Factor
Pull-down menu - selection of scaling
factor of base sample rate
Values: 1 FS, 2 FS, 4 FS **
Fast
SRC™
Pull-down menu - enabling / disabling
of Sample Rate Conversion at
Dante I/O ***
OFF = SRC not active
ON = SRC active
* Selecting WCK as clock source will change the
operating mode of the MADI BNC input, accepting a
word clock signal according to AES11 there.
** See „Introduction“ on page 27.
*** See „Sample Rate Conversion“ on page 36.