Manual
Table Of Contents
- About This Manual
- Chapter 1: Overview
- CHAPTER 2: Legal issues & facts
- Chapter 3: Installation
- CHAPTER 4: Operation
- CHAPTER 5: Remote Control
- CHAPTER 6: Troubleshooting and Maintenance
- CHAPTER 7: Technical Data
- Appendix A - Wiring Sketches
- Appendix B - Working with BLDS™
- Appendix C - Working with ch 57 mode
- Appendix D - Firmware Update
- Index
page 46 of 94 EXBOX.MD Manual - Version 1.7
CHAPTER 5: Remote Control
Network View
The 'Network View' is organised in several tabs. All
detected Dante devices are shown on a list.
EXBOX.MD is delivered with the network interface
set to DHCP as a default. Dante Controller can
be used to discover the device on the network
and change the IP configuration if necessary - see
"Network Config" on page 50.