Manual
Table Of Contents
- About This Manual
- Chapter 1: Overview
- CHAPTER 2: Legal issues & facts
- Chapter 3: Installation
- CHAPTER 4: Operation
- CHAPTER 5: Remote Control
- CHAPTER 6: Troubleshooting and Maintenance
- CHAPTER 7: Technical Data
- Appendix A - Wiring Sketches
- Appendix B - Working with BLDS™
- Appendix C - Working with ch 57 mode
- Appendix D - Firmware Update
- Index
page 41 of 94EXBOX.MD Manual - Version 1.7
CHAPTER 4: Operation
SAMPLE
RATE
44.1k
LED green - indicates the base
rate of the audio engine.
(OFF) = base rate is different
from 44.1 kHz
(ON) = base rate of 44.1 kHz
(or multiple of) is used
SAMPLE
RATE
48k
LED green - indicates the base
rate of the audio engine.
(OFF) = base rate is different
from 48 kHz
(ON) = base rate of 48 kHz (or
multiple of) is used
SAMPLE
RATE
2 FS
LED yellow - indicates the scaling
factor of the base rate.
(OFF) = scaling factor is 1 FS
(ON) = scaling factor is 2 FS
(blinking) = scaling factor does not
match the sample rate
of the brooklyn board.*
SAMPLE
RATE
4 FS
LED white - indicates the scaling
factor of the base rate.
(OFF) = scaling factor is 1 FS
(ON) = scaling factor is 4 FS
* At this time it is necessary to adjust the sample rate in
both the Dante controller and the EXBOX.MD Remote
when changing between 1 FS and 2 FS.