Manual

page 36 of 94 EXBOX.MD Manual - Version 1.7
CHAPTER 4: Operation
Sample Rate Conversion
Firmware 1.6 introduces optional sample rate
conversion for the Dante I/O. This is helpful if the
device can't be clocked to the Dante network (or act
as grandmaster).
The 'FastSRC™' is a low latency sample rate
converter and ensures seamless exchange between
MADI and Dante I/O when both sources are not
synchronised. It is either switchable in the EXBOX
Remote or in globcon.
NOTE
When the device is clocked via PTP, it is neither
necessary nor recommended to activate the FSRC.
SFP
BNC
SC
Dante
SFP
BNC
SC
Dante
Routing
EXBOX.MD
Routing
Dante Controller
FSRC