Manual
Table Of Contents
- About This Manual
- Chapter 1: Overview
- CHAPTER 2: Legal issues & facts
- Chapter 3: Installation
- CHAPTER 4: Operation
- CHAPTER 5: Remote Control
- CHAPTER 6: Troubleshooting and Maintenance
- CHAPTER 7: Technical Data
- Appendix A - Wiring Sketches
- Appendix B - Working with BLDS™
- Appendix C - Working with ch 57 mode
- Appendix D - Firmware Update
- Index
page 34 of 94 EXBOX.MD Manual - Version 1.7
CHAPTER 4: Operation
Input State / Clocking
Five LEDs inform about the state of each signal input
and the selected clock source of the device.
The device ofers several options for clocking:
• PTP (Precision Time Protocol) -
IEEE 1588-2002 / PTPv1 or v2 in AES67 mode
• MADI input
• Word Clock (@ MADI BNC input)*
• internal clock generator
CLOCK
SOURCE /
SYNC
SFP
BNC*
SC
PTP
INT
LED - indicates selected clock
source and the lock / sync state
of MADI input, PTP-clock or the
internal clock generator.
(OFF) = no signal lock
(50 % green) = signal lock, in sync
(100 % green) = signal lock, in sync,
selected clock source
(blinking red) = signal lock, not in sync
with selected clock
source
(blinking green) = input selected as
clock source and
no signal lock.
* See „Clocking to word clock“ on page 38.