Manual
Table Of Contents
- About This Manual
- Chapter 1: Overview
- CHAPTER 2: Legal issues & facts
- Chapter 3: Installation
- CHAPTER 4: Operation
- CHAPTER 5: Remote Control
- CHAPTER 6: Troubleshooting and Maintenance
- CHAPTER 7: Technical Data
- Appendix A - Wiring Sketches
- Appendix B - Working with BLDS™
- Appendix C - Working with ch 57 mode
- Appendix D - Firmware Update
- Index
page 25 of 94EXBOX.MD Manual - Version 1.7
Chapter 3: Installation
The connected power supply must provide a current
limiting to a maximum of 2.5 A.
Keep any packaging in order to protect the device
should it need to be dispatched for service.
Never connect a PoE link to a network interface that
is not marked explictly for PoE operation. The voltage
supplied there may damage the interface.
WARNING!
Power over Ethernet
The device can also be operated via a power over
ethernet connection. Connect the port labelled '01
(PoE)' to an appropriate PoE switch (PoE Class 0 /
0.4 - 13 W, IEEE 802.3af).
WARNING!
TIP