Installation guide
DirectOut Technologies
®
page 27 of 30 © 2012 DirectOut GmbH D.O.TEC
®
M.1k2 Hardware & Installation Guide - Version 1.1
Appendix D
In a network environment each device (computer, printer, D.O.TEC®
M.1k2…) needs its own and unique IP address. This can be achieved
by a manual setup or by using a DHCP server within a network.
The use of a DHCP may ease up the administration of a network.
However, if fixed and known addresses are a need, it is helpful to
set up a network manually.
Example2-Networkwithrouter
IP Adress: 192.168.74.2
Network Mask: 255.255.255.0
Gateway: 192.168.74.1
DNS: 8.8.8.8
IP Adress: 192.168.74.15
Network Mask: 255.255.255.0
Gateway: 192.168.74.1
DNS 1: 192.168.74.1
DNS 2: 8.8.8.8
IP Adress: 192.168.74.5
Network Mask: 255.255.255.0
Gateway: 192.168.74.1
DNS: 8.8.8.8
IP Adress: 192.168.74.1
Network Mask: 255.255.255.0
Gateway: 192.168.74.1
DNS: 8.8.8.8
Three devices are connected by a router that handles the traffic
within the network. Each device has its own <ip address>.
IP Adress: 10.0.0.20
Network Mask: 255.255.255.0
Gateway: 10.0.0.20
DNS: 8.8.8.8
IP Adress: 10.0.0.24
Network Mask: 255.255.255.0
Gateway: 10.0.0.20
DNS 1: 8.8.8.8
DNS 2: 8.8.8.8
Example1-PeertoPeer
The devices are connected directly. This setup may be used at initial
operation of the D.O.TEC® M.1k2.