Installation guide

DirectOut Technologies

M.1k2 Hardware & Installation Guide - Version 1.1

CHAPTER 3: Installation

Installing the Device

1. Open the packaging and check that the contents have been

delivered complete and undamaged.

2. Fix the device in a 19’’ frame with four screws, or place it on a

non-slip horizontal surface.

Warning

Avoid damage from condensation by waiting for the device to adapt

to the environmental temperature. Proper operation can only be

guaranteed between temperatures of 5º C and 45º C and a maxi-

mum relative humidity of 80%, non-condensing.

Ensure that the unit has suffcient air circulation for cooling. Do NOT

cover the fan outlets and the slots at the sides of the device!

Retain the protective cap if an optical port is unused. This will pro-

tect against soiling which can lead to malfunction.

3. Remove the protective caps from the optical MADI ports be-

fore use.