Manual

page 35 of 48ANDIAMO.AES (SRC) Hardware Guide - Version 2.0
CHAPTER 4: Operation
Connecting MADI
The MADI ports are used for transmission of 64 audio channels (AES10).
Two different MADI I/O confi gurations are available:
1 x SC-Socket 2 x SC-Socket
1 x BNC coaxial
MADI 1
OUT
SC socket (optical)
MADI output (64 ch), connect for MADI output signal here
MADI 1
IN
SC socket (optical)
MADI input (64 ch), connect MADI input signal here
MADI 2
OUT
SC socket (optical) or BNC socket (coaxial), 75 Ω
MADI output (64 ch), connect for MADI output signal here
MADI 2
IN
SC socket (optical) or BNC socket (coaxial), 75 Ω
MADI input (64 ch), connect MADI input signal here
For MADI input selection see „Clocking to MADI“ on page 27.
The MADI outputs may work in parallel or idependent from each other - see
“Extended Routing” on page 33.
TIP
Additional settings via remote control:
• Routing Matrix (Matrix Mode / Extended Routing)
• Redundancy Modes