Manual

page 31 of 48ANDIAMO.AES (SRC) Hardware Guide - Version 2.0
CHAPTER 4: Operation
Level Meters - digital I/O
All 16 AES3 ports have an individual display with three LEDs each. A SYNC LED
indicates the sync state for each port individually. More details about clocking to
AES see „Clocking to AES“ on page 25.
AES IN
SYNC
(Port 1 - 16)
LED (green): indicates sync status of the AES input
LED ON = AES signal is in sync
LED blinking = AES input signal is locked but not in sync or
scaling factor does not match.
LED OFF = no signal detected
AES IN
SIG
LED (green): indicates signallevel of channel input.
LED ON = digital input signal equals to more than -80 dBFS
The light intensity of the LEDs depends on the
audio level.
AES OUT
SIG
LED (green): indicates signallevel of channel input.
LED ON = digital output signal equals to more than -80 dBFS
The light intensity of the LEDs depends on the
audio level.
The SRC version features another 16 LEDs to monitor the operational status of the
sample rate converters on each AES3 input.
AES IN
SYNC
(Port 1 - 16)
LED (blue): indicates activation status of sample rate
converter at the AES input
LED ON = SRC active
LED OFF = SRC not active