Manual

page 26 of 48 ANDIAMO.AES (SRC) Hardware Guide - Version 2.0
CHAPTER 4: Operation
SRC Version
For integration of AES signals that are not in sync with the selected system clock,
each AES input is equipped with a sample rate converter. These may be switched
in groups of eight channels.
Four LEDs indicate the activation status of each sample rate converter group
individually. Another 16 SRC LEDs in the metering section display the SRC status
of each AES3 port - see page 31.
AES INPUT SRC
(01..08 / 09..16 /
17..24 / 25..32)
LED (blue): indicates activation status of sample
rate converter group
LED ON = Sample rate converter group active
LED OFF = Sample rate converter group not active
NOTE
Latency introduced by SRC: less than 140 samples