Manual

page 16 of 48 ANDIAMO.AES (SRC) Hardware Guide - Version 2.0
CHAPTER 3: Installation
This device may operate with only one power supply. To provide power supply
redundancy, it is recommended to connect both PSU1 and PSU 2 to independent
power supplies with separate fuses.
This device must be connected to the mains using the three-cord power leads
supplied with the system. Only supply the voltages and signals indicated (84 V –
264 V).
4. Connect the signal cables for the digital audio signals to the DSUB-25
connectors.
5. Using the power cord provided connect the PSU to a matching power supply:
WARNING
NOTE