Manual

page 59 of 140Prodigy.MP Manual - Version 2.4
CHAPTER 5: Managing Device
Tap / click to open / <function>
Lock icon Lock or unlock the device control with a pin code. *
MUTE ALL Mute / Un-mute all physical outputs and signal paths
MUTE SLOTS Mute / Un-mute all outputs of converter slots
MUTE NET 1 Mute / Un-Mute output of network slot NET 1
MUTE NET 2 Mute / Un-Mute output of network slot NET 2
MUTE MADI 1 Mute / Un-Mute output of MADI slot MADI 1
MUTE MADI 2 Mute / Un-Mute output of MADI slot MADI 2
MUTE DSP Mute / Un-Mute of DSP blocks (not bypassing) **
* A four-digit pin code needs to be defined when locking for the first time. To
unlock device the pin code is required. The pin code can be reset in the
PRODIGY.MP plugin of globcon (Settings / Front Panel) when the device is
locked or in the device settings (see “DEVICE SETTINGS” on page 67) when
the device is unlocked.
** MUTE DSP will interrupt the signal chain at the DSP block section, but not mute
a physical output.