Manual
Table Of Contents
- About This Manual
- CHAPTER 1: Overview
- CHAPTER 2: Legal issues & facts
- CHAPTER 3: Installation
- CHAPTER 4: Operation
- CHAPTER 5: Managing Device
- CHAPTER 6: RAV.IO
- Introduction
- Connecting Audio Network
- Status - Overview
- Status - Sync
- Status - Network
- Status - Device
- Status - Input Streams
- Status - Output Streams
- Advanced - Overview
- Advanced - PTP Settings
- Advanced - PTP Unicast
- Advanced - PTP Profile Customized Settings
- Advanced - Current PTP Master
- Advanced - PTP Statistic
- Advanced - PTP Clock Setting
- Advanced - Network Advanced Settings
- Advanced - PTP Jitter
- NMOS - Overview
- NMOS - NIC1 & NIC2
- NMOS - Additional Settings
- Logging
- Statistic
- Switch
- RAV.IO - Firmware Update
- CHAPTER 7: DANTE.IO
- CHAPTER 8: Troubleshooting and Maintenance
- CHAPTER 9: Technical Data
- Index
- Appendix A - DSUB-25 Pin assignment
- Appendix B - DSUB-9 Pin assignment
- Appendix C - Dimensions
- Appendix D - System Update & License Installation
page 51 of 140Prodigy.MP Manual - Version 2.4
Clocking
The device offers several options for clocking.
• PTP (Precision Time Protocol) - IEEE1588-2008 / PTPv 1 & 2 *
• SoundGrid (SoE) *
• Word Clock / Video
• MADI input *
• AES3 input *
• internal clock generator
* depending on the modules installed.
When PTP (network) is selected the device can either act as slave or as network
grandmaster.
The front panel informs about selected clock sources and their lock / sync state.
SYNC
MADI 1
MADI 2
WCK 1
WCK 2 / VIDEO
NET 1
NET 2
AES
LED RGB - indicates the lock / sync state of
MADI input, Network-clock, word clock or
AES3 input.
(OFF) = no signal lock
(ON, green) = signal lock, in sync
(ON, blue) = signal lock, in sync,
selected clock source
(blinking, green) = signal lock, not in sync
with selected clock source
(blinking, red) = input selected as clock source
and no signal lock.










