Manual
Table Of Contents
- About This Manual
- CHAPTER 1: Overview
- CHAPTER 2: Legal issues & facts
- CHAPTER 3: Installation
- CHAPTER 4: Operation
- CHAPTER 5: Managing Device
- CHAPTER 6: RAV.IO
- Introduction
- Connecting Audio Network
- Status - Overview
- Status - Sync
- Status - Network
- Status - Device
- Status - Input Streams
- Status - Output Streams
- Advanced - Overview
- Advanced - PTP Settings
- Advanced - PTP Unicast
- Advanced - PTP Profile Customized Settings
- Advanced - Current PTP Master
- Advanced - PTP Statistic
- Advanced - PTP Clock Setting
- Advanced - Network Advanced Settings
- Advanced - PTP Jitter
- NMOS - Overview
- NMOS - NIC1 & NIC2
- NMOS - Additional Settings
- Logging
- Statistic
- Switch
- RAV.IO - Firmware Update
- CHAPTER 7: DANTE.IO
- CHAPTER 8: Troubleshooting and Maintenance
- CHAPTER 9: Technical Data
- Index
- Appendix A - DSUB-25 Pin assignment
- Appendix B - DSUB-9 Pin assignment
- Appendix C - Dimensions
- Appendix D - System Update & License Installation
page 92 of 140 Prodigy.MC Manual - Version 2.4
CHAPTER 6: RAV.IO
Status - Output Streams
The device can send up to 32 streams. The overview displays the basic information
of each stream.
01 to 32 State of outgoing streams
(OFF) = stream not activated
(ON) = stream activated, sending data
(ON) = stream activated, stream output via both
NICs selected, but one NIC is not linked
to the network.
01 to 32
Name
Name of stream defined in the settings
01 to 32
xx ch
Number of audio channels transported by the stream
01 to 32 Activate or deactivate stream.
= stream activated
= stream deactivated
OUTPUT STREAMS Click to activate or deactivate all streams.
= activate all streams
= deactivate all streams (requires confirmation)
Hyperlinks:
• Name (p 94)
Mouse over:
• LED - indicating stream state