Manual
Table Of Contents
- About This Manual
- CHAPTER 1: Overview
- CHAPTER 2: Legal issues & facts
- CHAPTER 3: Installation
- CHAPTER 4: Operation
- CHAPTER 5: Managing Device
- CHAPTER 6: RAV.IO
- Introduction
- Connecting Audio Network
- Status - Overview
- Status - Sync
- Status - Network
- Status - Device
- Status - Input Streams
- Status - Output Streams
- Advanced - Overview
- Advanced - PTP Settings
- Advanced - PTP Unicast
- Advanced - PTP Profile Customized Settings
- Advanced - Current PTP Master
- Advanced - PTP Statistic
- Advanced - PTP Clock Setting
- Advanced - Network Advanced Settings
- Advanced - PTP Jitter
- NMOS - Overview
- NMOS - NIC1 & NIC2
- NMOS - Additional Settings
- Logging
- Statistic
- Switch
- RAV.IO - Firmware Update
- CHAPTER 7: DANTE.IO
- CHAPTER 8: Troubleshooting and Maintenance
- CHAPTER 9: Technical Data
- Index
- Appendix A - DSUB-25 Pin assignment
- Appendix B - DSUB-9 Pin assignment
- Appendix C - Dimensions
- Appendix D - System Update & License Installation
page 79 of 140Prodigy.MC Manual - Version 2.4
CHAPTER 6: RAV.IO
Network Settings
The two network interface controllers (NIC 1 / NIC 2) are configured individually.
Device name Input field - Module’s name in the network. Used
e.g. for mDNS service. The name needs to be unique
throughout the network.
Dynamic IP address
(IPv4)
Switch to enable the device’s DHCP client.
IP address is assigned by DHCP server. If no DHCP is
available the IP address is determined via Zeroconf.
Static IP address (IPv4) Switch to disable the device’s DHCP client. Manual
configuration of network parameters.
IP address (IPv4) Module´s IP Address
Subnet mask (IPv4) Module’s subnet mask
Gateway (IPv4) IP address of gateway
DNS server (IPv4) IP address of DNS server
Apply Button to confirm changes. Another popup window
will appear to confirm a reboot of the module.